FREE WOWPODS WITH ANY ORDER OVER £150

Leave a review

*All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.
Back To Decorating

Perma-White® Interior Paint Matt 2.5 litre

Zinsser Perma-White® Interior Matt Paint is recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens.

ZINPWES25L comes in the following:
Container type: Tin.
Volume: 2.5 litre.

Perma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces.

Perma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film.

Perma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller.

Application information:
Coverage: 10m² per litre.
Touch dry: 30 minutes.
Hard dry: 7-10 days.
Recoatable: 2 hours.

Read More
£0.00 INC VAT
£0.00 EX VAT
Notify me when back in stock
PayPal
Maestro Mastercard Visa Visa Electron America Express
  • Description
    • Category: Decorating

    Zinsser Perma-White® Interior Matt Paint is recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens.

    ZINPWES25L comes in the following:
    Container type: Tin.
    Volume: 2.5 litre.

    Perma-White® is guaranteed to prevent the growth of mould and mildew on the paint film for at least 5 years. The interior paint protects itself against the damaging effects of unsightly mould and mildew as it brightens ceilings, walls, trim and other related paintable interior surfaces.

    Perma-White® bonds to existing solvent-based or glossy paints – even Formica® and ceramic tile without sanding. It also seals flat paint, new drywall, cement block and concrete. It is ideally suited for any area where conditions of persistent high humidity, frequent temperature changes and poor air circulation may promote mould and mildew growth and cause deterioration of the paint film.

    Perma-White® can be applied via airless sprayer, brush, conventional spray, pad or roller.

    Application information:
    Coverage: 10m² per litre.
    Touch dry: 30 minutes.
    Hard dry: 7-10 days.
    Recoatable: 2 hours.

COMPARISON BASKET COMPARE