FREE WOWPODS WITH ANY ORDER OVER £150
Trend TRE20114TC 2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm
Trend TRE20114TC 2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm
Trend TRE20114TC 2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm
Trend TRE20114TC 2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm

Leave a review

*All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.
Back To Power Tool Accessories

Trend TRE20114TC 2/01 x 1/4 TCT Single Flute Cutter 1.5 x 6.0mm

SKU: TRE20114TC
The Trend 2/01 x 1/4 TCT Single Flute Cutter has the following specification: Cutting Diameter: 1.5mm Cutting Depth: 6.0mm Overall Length: 43mm Shank Diameter: 1/4in Trend Single Flute Cutters are chosen for fast, free cutting when cutting speed takes preference over finish. If you require a cleaner cut, two flute cutters are recommended. Suitable for grooving, rebating, morticing and drilling. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.
Read More
Available to Order
£26.95 INC VAT
£22.46 EX VAT
PayPal
Maestro Mastercard Visa Visa Electron America Express
  • Description
    • Product Code: TRE20114TC
    • Brand: Trend
    • Barcode: 5027654003510
    • Category: Power Tool Accessories

    The Trend 2/01 x 1/4 TCT Single Flute Cutter has the following specification:

    Cutting Diameter: 1.5mm
    Cutting Depth: 6.0mm
    Overall Length: 43mm
    Shank Diameter: 1/4in

    Trend Single Flute Cutters are chosen for fast, free cutting when cutting speed takes preference over finish. If you require a cleaner cut, two flute cutters are recommended. Suitable for grooving, rebating, morticing and drilling.

    Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage.

    Single flute cutters should not be used in eccentric chucks.

COMPARISON BASKET COMPARE